The category talks about the various topics on transportation engineering. Traffic sign v/s signal- There is often a misconception that traffic signals and signs are the same. But the truth is that both are traffic control devices, but different. Traffic signs are placards provided to guide you in the journey whereas signals are placed only at the main intersections to manage the traffic. For example, imagine a junction where heavy traffic is found usually in the north-south direction. If there is no much traffic in the east-west direction, traffic signals are not required at the junction. Yeah, simple logic. Growing traffic density and insufficient expansion of available road space have resulted in congestion and related delays during peak hours in urban roads around the world. It results in increased travel time, which reduces the performance of the transport network. This problem is more serious in urban roads with frequent intersections, which are the main points of conflict for traffic movements. Traffic signals at the main intersections can curb the situation. The design of signals will be such that it shows a green light where there are less traffic and red where there is more traffic. It also considers the pedestrians who may cross the road in between and allots minimum of 10 to 15 seconds for that. Another interesting fact it considers is that the overall waiting time should not exceed 120 seconds at normal situations, which is the average tolerance level of humans.

road-camber

Camber in roads – Types of Road Cambers

Camber in roads is the slope or angle built into the road surface, typically seen on curved or sloped sections of the road. This slope is designed to provide several benefits, including improved drainage, enhanced vehicle stability, and better driver visibility. The purpose of camber on roads is to ensure safe and comfortable driving conditions for motorists.

Read more

Bitumen for roads- Bitumen Uses, Grades and Types

Bitumen for roads is an important topic to understand when it comes to road construction. Bitumen is used in road construction because of the wide range of features and advantages it possesses over other pavement construction materials. The significance of bitumen in the construction of roads will be demonstrated in this article. In addition, we shall see bitumen road layers, various bituminous materials, cutback bitumen, bitumen grade, and bitumen properties.

Read more
intelligent transportation system

Intelligent transportation systems: Top 15 systems

What is intelligent transportation system? It is the application of sensing, analysis, control and communications technologies to ground transportation in order to improve safety, mobility and efficiency. Components of ITS are 1. Tracking system 2. Electronic timetable 3. Smart commuting… Benefits of ITS, uses and challenges of ITS are also thoroughly explained in the article

Read more
coning of rail

Coning of wheels-What is coning of wheels?

Coning of wheels is an interesting topic in railway engineering. In this blog, we will see the theory of coming of rail wheels, starting from what is coning of wheels. What is coning of wheels? The space between the inner borders of wheel rims is by and large kept less than the measurement of the track.

Read more
self driving cars

Self-driving cars – Benefits, Working and Challenges

In the past five years, autonomous driving has become a reality and is commercially available now. A car that would drive on its own was something beyond imagination a few decades back. Thanks to technological development, self driving cars are becoming a reality.

Read more

Types of Traffic Signals – Mechanism and Advantages

Types of traffic signals – Traffic signals regulate the movement of both vehicles and pedestrians by assigning priorities to various traffic movements. Traffic signals are broadly classified into three. 1) Traffic control signals, 2) Pedestrian Signals, 3) Special traffic signs

Read more
Highway engineering

Highway Engineering- Definition, Importance and Construction

Highway engineering is an important topic in civil engineering. It includes the study of roads in depth. The technical aspects involved in this subject plays a significant role in construction of different types of roads. In this blog, I will show you all the details of the subject including the definition, topics, importance etc.

Read more
Softening point test for bitumen

Bitumen Softening Point Test – Ring and ball method

The bitumen softening Point Test is done to determine the consistency of bitumen. Bitumen is a viscoelastic material, which means it behaves like both a liquid and a solid state. It does not have a specific melting point. As the temperature increases, the bitumen becomes softer and the viscosity of the bitumen decreases. One of the common parameters for classifying bitumen is the softening point of the bitumen. This property shows at what temperature the bitumen softens. 

Read more